Blade forged and hardened alloy steel with V-notch in tapered edge Heavy, strong, multi-purpose tool 3" width protects concrete when stripping forms Ideal for prying forms and for use to align walls during tilt-up construction; to remove shingles and flooring; to roll and align large pipe.

Application

A quality hose for use with mobile air compressors to 150# working pressure.

Construction

Black, oil mist resistant rubber tube, two braid equivalent of polyester spiral reinforcement. Abrasion and sunlight resistant EPDM rubber cover.

Temperature Range

-40°F to 190°F

Ideal for construction, heavy asphalt removal, breaking reinforced concrete, frozen ground, rock, plant maintenance and general demolition work. Weight 53 pounds, Blows per minute 1300, Air requirements 42.4 cfm, Bit size 1-1/8 

BREAKER AIR 60LBS MAC³.pdf

Ultra quit tow behind air compressor, 46.8 HP, 185 CFM, 120 PSI Maximum air outlet pressure, (2) 3/4" Outlets, (1) 3/4" Attached 100ft hose reel. 24 Gallon diesel fuel tank.                             Air Compressor 185 CFM Airman.pdf                                                           

6.5 CFM @ 90PSI; Powerful enough to run two framing nailers.   Air Compressor Makita.pdf

Driving Power 1050 Inch Lbs. Fastener Gauge .113 - .131 Fastener Range 2" to 3 1/2" 28° Wire Collated Stick Framing Nails Thread Fitting Type 1/4" NPT Application Framing Sheathing Siding Trusses Bridging Wood to masonry Engineered lumber Fencing Exterior decks. Nailer Stick Bostitch.pdf

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Tool-free adjustable exhaust conveniently directs exhaust away from the user
• Fastener Length: 1-1/4" - 2-1/2"; Fastener Diameter: .080" - .092"
• Nailer Fence.Siding Bostitch.pdf
• 
  

N62FNB-E finish nailer makes light work of even the most demanding of applications.Driving popular 15 gauge angled finish nails from 1¼ - 2½                                                                       Nailer Finish Bostitch.pdf

 Coil roofing nailer pnuematic. ¾ - 1¾

Adjustable depth control. Nailer Roofing Bostitch.pdf

Removing linoleum, vinyl tiles, carpets and coatings. Used with chipping hammers. Shank SDS MAX

• Lightweight simple to operate cutter
• Self-measuring cutter cuts all types resilient floor tile
• Tile guide provides accurate repeat cuts
• Cuts 12" x 12" tile straight
• Cuts 9" x 9" tile diagonally                                                                                                                                                 Vinyl Floor Tile Cutter Bon-Tool.pdf

100 LB

• Cutting length - 43 cm / 17 in
• Diagonal cutting length - 30x30 cm / 12 in
• Cutting height - 6-15 mm / 2.2 x 15 in
• Separator power - 550 kg / 1212.54 lbs
•   Tile Snapper Felker Short how To Video.pdf

The MK-101 features a powerful, high torque, fan-cooled motor and one-piece unitized steel frame. The linear guide bar system provides precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow. Length of Cut 20"  Diagonally Cuts 14" Tile, 10" Diamond blade, 5/8 arbor.  Weight 92lbs.  MK 101 Tile Saw.pdf

The lightweight and portable MK-370EXP Tile Saw is made to the highest professional specifications. It features a built-in adjustable 45° cutting head that allows for quick and accurate miter cuts. 7" blade, 2"cut, rips 18" Weight 35lbs.

MK-370EXP Tile Saw.pdf

 Featuring a 1-3/4 max HP (11 Amp, 24,000 RPM) Milwaukee motor, these powerful and precise routers give you the upper hand in all but the heaviest of cuts. Router Millwaukee.pdf

Protects trim coil and keeps it rolled tight while still allowing the material to be dispensed.

Works with TrimCutter™ to allow material to be cut to length.

Van Mark Coil Dispenser.pdf

Material scoring tool that scores at "snap off" point. Van Mark Quick Score.pdf

Material Cutting ⁄ Slitting Tool that provides professional smooth edges. Van Mark Trim Cutter.pdf

Features the easy-to-use, dependable, superior cam-locking system Bends up 180° Hems for complex bend profiles. Engineered to perform 5 ⁄ 8" bend for tighter J-Channel pockets.VanMark Flashing Brake 4ft.pdf

Aluminum (3003H14).027" Galvanized Steel29 ga. Painted Steel (Grade D)29 ga. Roofing Copper 24 oz. soft Zinc.032"  Soft Stainless Steel (304L)29 ga.* Capacities are based on standard metal properties for coil & sheet. Throat Depth:14"                                                                               VanMark Flashing Brake 10ft.pdf

Clutch in low speed High operating speeds for maximum productivity 90° left-right, Roto-Lok® handle for maximum operating comfort Easy turn gear shift knob Comfort grip switch handle and gear case with front T-bar handle.        Drill Hole Hawg Half Inch.pdf

1/2 in. capacity in steel, handles up to a 2-9/16 in. selfeed bit Two speeds: 335 and 750 rpm Powerful 7 amp motor.Voltage 120 AC. No Load RPM 500 Chuck Type Keyed Wood Capacity-Auger Bit 1-1/2" Wood Capacity-Self-Feed Bit 3-5/8" Metal Capacity-Twist Bit 1/2" Chuck Size 1/2"  

Drill Right Angle Milwaukee.pdf

Chuck Type Keyless, Metal Wood Capacity-Flat Boring Bit 1" Wood Capacity-Hole Saw 1-3/4" Metal Capacity-Twist Bit 3/8" Chuck Size 3/8" Cord Type 2-Wire Cord Length 8' Drill 3.8 Corded Milwaukee.pdf