Houst Rentals

Torch has a 3" diameter bell and a total length of 33 1/2''               500,000 btu/hr

(Users Manual)

(How to video)

•Pulls wood or steel stakes with ease •Pulls up to 7/8" round stakes & 1 1/2" flat stakes

Blade forged and hardened alloy steel with V-notch in tapered edge Heavy, strong, multi-purpose tool 3" width protects concrete when stripping forms Ideal for prying forms and for use to align walls during tilt-up construction; to remove shingles and flooring; to roll and align large pipe.

Application

A quality hose for use with mobile air compressors to 150# working pressure.

Construction

Black, oil mist resistant rubber tube, two braid equivalent of polyester spiral reinforcement. Abrasion and sunlight resistant EPDM rubber cover.

Temperature Range

-40°F to 190°F

Ideal for construction, heavy asphalt removal, breaking reinforced concrete, frozen ground, rock, plant maintenance and general demolition work. Weight 53 pounds, Blows per minute 1300, Air requirements 42.4 cfm, Bit size 1-1/8 (Link to Operator's Manual and Specifications)

Ultra quit tow behind air compressor, 46.8 HP, 185 CFM, 120 PSI Maximum air outlet pressure, (2) 3/4" Outlets, (1) 3/4" Attached 100ft hose reel. 24 Gallon diesel fuel tank.                                                                                         (Users Manual) (Shut Down Procedure)

6.5 CFM @ 90PSI; Powerful enough to run two framing nailers.

(Users Manual)

Driving Power 1050 Inch Lbs. Fastener Gauge .113 - .131 Fastener Range 2" to 3 1/2" 28° Wire Collated Stick Framing Nails Thread Fitting Type 1/4" NPT Application Framing Sheathing Siding Trusses Bridging Wood to masonry Engineered lumber Fencing Exterior decks.

(Users Manual)

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Tool-free adjustable exhaust conveniently directs exhaust away from the user
• Fastener Length: 1-1/4" - 2-1/2"; Fastener Diameter: .080" - .092"(Users Manual)
• 
  
  

N62FNB-E finish nailer makes light work of even the most demanding of applications.Driving popular 15 gauge angled finish nails from 32-64mm.

(Users Manual)

3/4-inch to 1-3/4-inch coil roofing nailer.

Adjustable depth control.

(Users Manual)

 Featuring a 1-3/4 max HP (11 Amp, 24,000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts.

(Users Manual)

Clutch in low speed High operating speeds for maximum productivity 90° left-right, Roto-Lok® handle for maximum operating comfort Easy turn gear shift knob Comfort grip switch handle and gear case with front T-bar handle.

(Users Manual)

1/2 in. capacity in steel, handles up to a 2-9/16 in. selfeed bit Two speeds: 335 and 750 rpm Powerful 7 amp motor.Voltage 120 AC. No Load RPM 500 Chuck Type Keyed Wood Capacity-Auger Bit 1-1/2" Wood Capacity-Self-Feed Bit 3-5/8" Metal Capacity-Twist Bit 1/2" Chuck Size 1/2"

(Users Manual)

Chuck Type Keyless, Metal Wood Capacity-Flat Boring Bit 1" Wood Capacity-Hole Saw 1-3/4" Metal Capacity-Twist Bit 3/8" Chuck Size 3/8" Cord Type 2-Wire Cord Length 8'

Users Manual

The extended spindle, low-profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. The hinged depth adjustment plate has five settings for common underlayment thicknesses including ¹/₄", ³/₈", ¹/₂", ⁵/₈", or ³/₄". Also includes a clutch mechanism that may disengage to reduce kickback. Comes with No. 787 3 ³/₈" Carbide-Tipped Blade for wood cutting. Do not use any other blades with the saw

(Product Info)

(Users Manual)

15-inch blade for the toughest and largest of sawing jobs you can imagine. When looking for a good miter saw to produce straight and accurate cuts every time.

Created to handle heavy-duty work that needs a high-capacity, powerful blade, this Makita® 16-5/16-inch circular saw gives you the power to cut through the hardest materials.  Circular Saw 16-5/16" 32-tooth blade cuts 6-1/4" deep.

(Users Manual) (Quick Video)

The DWX723 Heavy-Duty Miter Saw Stand is designed to work with all brands of miter saws. Lightweight aluminum construction (29 lbs.) allows for easy transport and leg lock levers allow quick set up. 5-1/2' beam extends to support up to 16 ft. of material and up to 500 lbs.

The 12 in. Double Bevel Sliding Compound Miter Saw has a 15 Amp motor and integrated XPS crosscut positioning system for adjustment-free, accurate cut line indication. Tall sliding fences support 7-1/2 in. of nested crown and 6-3/4 in. of base molding vertically. Exclusive Back Fence Design cuts up to 2x14 dimensional lumber at 90 increased miter capacity of 60 (R) and 50 (L) features durable stainless-steel miter detent plate with cam lock for repeatable accuracy with easy adjustments. Stand is an additional charge.(Users Manual)

The HTW Steam Wallpaper Stripper designed for the tool rental and professional decorating markets, is the most productive, safest and easiest to use steam wallpaper stripper.

The HTW produces steam at just the right pressure and temperature for fast effective stripping with the minimum of condensation. This critical design feature reduces the risk of over-wetting wallboard or the plaster surface of the wall being stripped, and keeps the working environment comfortable.(Users Manual)(Instructional Video)

• 15.0 amp/4.0 HP (maximum motor HP) motor provides overload protection, increasing performance and durability
• Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity
• Quick-lock vise allows for fast clamping on different size materials to increase productivity
• 45° pivoting fence allows for fast and accurate angle cuts
• Metal Cutting blades sold separately. 
• (Users Manual)

Contractors love the portability of the wheelbarrow style 8-gallon air compressor. It provides essential air power for multiple tools around construction sites. 13.1 CFM @ 100 PSI

(Users Manual)

(How To Video)

• Undercuts walls, molding, inside corners, jambs, most toe spaces and a door while it is hanging in place.
• (Users Manual) (Quick Video)