• Jig Kit Made For Boring Cut-Outs In Wooden Doors
• For Doors 1-3/8" To 2-1/4" Thick

10 lbs Sledge Hammer With 36" Handle

Jobsite safety cones/traffic control 

Steel construction with 55" Handle and Serrated Edge Blade Size 11"L X 9 3/4 " W

Torch has a 3" diameter bell and a total length of 33 1/2''               500,000 btu/hr

(Users Manual)

(How to video)

•Pulls wood or steel stakes with ease •Pulls up to 7/8" round stakes & 1 1/2" flat stakes

Blade forged and hardened alloy steel with V-notch in tapered edge Heavy, strong, multi-purpose tool 3" width protects concrete when stripping forms Ideal for prying forms and for use to align walls during tilt-up construction; to remove shingles and flooring; to roll and align large pipe.

Application

A quality hose for use with mobile air compressors to 150# working pressure.

Construction

Black, oil mist resistant rubber tube, two braid equivalent of polyester spiral reinforcement. Abrasion and sunlight resistant EPDM rubber cover.

Temperature Range

-40°F to 190°F

 Ideal for construction, heavy asphalt removal, breaking reinforced concrete, frozen ground, rock, plant maintenance and general demolition work. Weight 53 pounds, Blows per minute 1300, Air requirements 42.4 cfm, Bit size 1-1/8 

Ultra quit tow behind air compressor, 46.8 HP, 185 CFM, 120 PSI Maximum air outlet pressure, (2) 3/4" Outlets, (1) 3/4" Attached 100ft hose reel. 24 Gallon diesel fuel tank.                                                                                         (Users Manual) (Start up Shut down Video)

6.5 CFM @ 90PSI; Powerful enough to run two framing nailers.

(Users Manual)

Driving Power 1050 Inch Lbs. Fastener Gauge .113 - .131 Fastener Range 2" to 3 1/2" 28° Wire Collated Stick Framing Nails Thread Fitting Type 1/4" NPT Application Framing Sheathing Siding Trusses Bridging Wood to masonry Engineered lumber Fencing Exterior decks.

(Users Manual)

• Drives wire weld and plastic inserted coil nails
• Adjustable depth guide sets nails to desired depths quickly and conveniently
• Lightweight aluminum design for durability
• Soft rubber foot helps to prevent damage to softer woods
• Tool-free adjustable exhaust conveniently directs exhaust away from the user
• Fastener Length: 1-1/4" - 2-1/2"; Fastener Diameter: .080" - .092"(Users Manual)
• 
  
  

N62FNB-E finish nailer makes light work of even the most demanding of applications.Driving popular 15 gauge angled finish nails from 32-64mm.

(Users Manual)

3/4-inch to 1-3/4-inch coil roofing nailer.

Adjustable depth control.

(Users Manual)

Removing linoleum, vinyl tiles, carpets and coatings

Used with our tool (SKU DJ2340)

Shank SDS MAX

• Lightweight simple to operate cutter
• Self-measuring cutter cuts all types resilient floor tile
• Tile guide provides accurate repeat cuts
• Cuts 12" x 12" tile straight
• Cuts 9" x 9" tile diagonally
• (Users Manual)

100 LB

• Cutting length - 43 cm / 17 in
• Diagonal cutting length - 30x30 cm / 12 in
• Cutting height - 6-15 mm / 2.2 x 15 in
• Separator power - 550 kg / 1212.54 lbs

The MK-101 features a powerful, high torque, fan-cooled motor and one-piece unitized steel frame. The linear guide bar system provides precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow. Length of Cut 20"  Diagonally Cuts 14" Tile, 10" Diamond blade, 5/8 arbor.  Weight 92lbs.

(Users Manual)

The lightweight and portable MK-370EXP Tile Saw is made to the highest professional specifications. It features a built-in adjustable 45° cutting head that allows for quick and accurate miter cuts. 7" blade, 2"cut, rips 18" Weight 35lbs.

(Users Manual) (Product Video)

 Featuring a 1-3/4 max HP (11 Amp, 24,000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts.

(Users Manual)

Protects trim coil and keeps it rolled tight while still allowing the material to be dispensed.

Works with TrimCutter™ to allow material to be cut to length

(Product Info)